How to Apply Spiked Sleeve Studs to Your Water Bottle

By Reusable Glass Water Bottles with Silicone Sleeves | bkr | Published: 2026-10-26

Category: How-to Guides

Learn how to safely attach spiked studs to your bkr silicone sleeve for a custom look without damaging the sleeve or bottle.

Quick answer

To apply spiked studs to your bkr silicone sleeve, push each stud through the sleeve from the inside out, then secure it according to the stud's design. Work slowly and check alignment before pressing fully.

Why silicone sleeves work well for studs

The soft, flexible silicone of a bkr sleeve holds studs securely without cracking or tearing. Because the material is food-grade and non-porous, small punctures from studs won't trap moisture or bacteria, and the sleeve remains easy to clean.

What to watch for

Avoid placing studs too close to the top or bottom edge of the sleeve, where the silicone is thinner and more likely to tear. Also, test the fit on your bottle before committing to a pattern, since studs can add bulk that affects how the sleeve slides on and off.

Step-by-step guide

1. Gather your materials: You'll need your bkr silicone sleeve, a set of spiked studs (with posts and backings), and a flat work surface. Remove the sleeve from the bottle and lay it flat. Working on a flat surface prevents the sleeve from shifting and helps you align studs evenly.
2. Plan your stud layout: Use a washable marker or simply lay studs on the sleeve to test spacing. Avoid placing studs within 1/2 inch of the sleeve's edges to reduce tearing risk. Double-check that the pattern doesn't interfere with the sleeve's ability to slide onto the bottle.
3. Insert the first stud from the inside: Turn the sleeve inside out. Push the stud's post through the silicone from the inside, then flip the sleeve right-side out and press the stud head firmly against the outer surface. If the post doesn't go through easily, use a blunt tool like a chopstick to gently widen the hole — never force it.
4. Secure the backing: Attach the stud's backing onto the post from the inside of the sleeve. Push until it clicks or sits flush. Repeat steps 3–4 for each stud. Check that each backing is fully seated; loose backings can fall off during use.
5. Test the fit on your bottle: Slide the sleeve onto your bkr bottle. Ensure the studs don't press against the glass or prevent the sleeve from fitting snugly. If needed, remove and reposition any stud that causes issues. Studs that press into the glass can create stress points — reposition or remove them to avoid damage.

Product info

EXHALE SPIKED LITTLE SLEEVE: The EXHALE SPIKED LITTLE SLEEVE is made from buttery soft food-grade pure silicone, protective and grippy, and fits 500mL/16oz Little bottles. Its flexible, durable material allows you to safely push studs through without damaging the sleeve, and the grippy texture keeps studs in place once applied.
EXHALE SPIKED LITTLE SLEEVE